5D Premium car floor mats
TPE assembly video
4D rubber mats
Assembly video
3D Floor Mats
Assembly video
Fitting instructions for 5D floor mats
Fitting instructions for 3D floor mats
The 5D floor mat set consists of three parts. The two smaller parts are intended for the front of the car. Place the floor mats on the left and right so that the wall behind the pedal and brake is covered. Press the mats gently by hand to ensure that they fit correctly.
Then take the fastening clips and attach them first to one side of the floor mat and then to the opposite side, as shown in the video. Attach them to the places provided by the car at the ends of the carpet.
Place the floor mat in the rear interior of the car so that the centre tunnel is also completely covered. Once you have laid out the mat, press it down gently with your hands so that it fits snugly.
To do this, it may be necessary to lift the seats and slide the curved side of the mat under the seats. Then attach the floor mat with the clips in the same way as before.
The 3D floor mats also consist of three parts. It is quite easy to recognise which area the individual parts are assigned to. For example, the rubber mat with cut-outs for the pedal and brake is laid out in front of the driver's seat.
The rubber mat designed for the centre tunnel, on the other hand, is placed in front of the right-hand passenger's seat. As the floor mats fit perfectly and have high edges, they are easy to lay out in the car.
After the large rubber mat in the rear area covers the centre tunnel, you must place the rubber floor mat for the left-hand front passenger over the exposed end. This ensures that this area is also securely fastened.